Elgar CW 801P-V Instrucciones de operaciones descargar pdf (Pagina 15)

Elgar CW-M Series

Meter Select switch: Current/frequency select

Output Voltage: Adjusted using 10–turn potentiometer

Output Current: Adjusted using 10–turn potentiometer

Output Frequency: Adjusted using 10–turn potentiometer

Overvoltage Protection: Settable 5 to 300 VRMS

using a 15–turn screwdriver adjust potentiometer

Displays

Voltage: 4–digit, 7–segment large, green LED display

Current or Frequency: 4–digit, 7–segment large, green LED display

Protection and Isolation

Overvoltage: Set screw adjustable

Overcurrent: 10–turn potentiometer

Accuracy: ±2% of range for linear loads with current >0.2 A for CW801M and

CW1251M, >0.4A for CW2501M.

Overtemperature: Internal monitor

Isolation Rating: 500V between either output terminal and chassis

Indicators

Output On: Green LED

Voltage Mode: Green LED

Current Mode: Green LED

Slave Mode: Green LED

Fault Mode: Red LED

Output Connector

Universal single socket connector for front panel power out on CW 801M and

CW 1251M

Line and neutral terminals can be switched through rear connector interconnect

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sin comentarios

Elgar CW 801P-V Instrucciones de operaciones Pagina 15